Welcome to Würth Professional Solutions For trade customers only
Adhesive for plastics REPLAST<SUP>®</SUP> Easy Superfast - ADH-PLA-2C-SUPERFAST-50ML

Adhesive for plastics REPLAST® Easy Superfast

Plastic adhesive REPLASTeasy Superfast
ADH-PLA-2C-SUPERFAST-50ML

Art.-no. 08935005
EAN 4068362240836
All versions

Prices for customers after login
Adhesive for plastics REPLAST® Easy Superfast

Art.-no. 08935005

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

For REPLAST® Easy plastic repair sets

An adhesive for any type of plastic


  • No need to use different types of adhesive

  • Can be used for repairs and structural gluing


Special static mixer


  • Excellent mixing ratio

  • Low adhesion loss (waste)


Fast hardening


Additional operations, like smoothing, can be performed after a very short period of time



Excellent chemical resistance


Resistant to a wide range of liquids, like petrol, various lubricating oils and ethyl acetate



Solvent-free

Notice

Due to the release agents used during plastic processing, adhesion problems may be created in certain cases. Not suitable for PE (polyethylene), PP (polypropylene) or PTFE (polytetrafluoroethylene). If necessary, check the compatibility of the material in an inconspicuous area.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage/usage conditions. We do not assume any liability for any technical information or advice provided free of charge by our customer service. Therefore, before using the product, anyone intending to make use of it must determine whether it is suitable for its planned use and, in any case, assumes all liability that may derive from its use. We ensure the consistent quality of our products. We reserve the right to make technical changes and other developments.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Passenger cars


Spoiler, grille and radiator slots, door fastening elements, bumpers and headlight bracket slots



Heavy vehicles and buses/coaches


Bumpers, wheel arches and plastic intake pipes.



Motorbikes


All panels

Instructions

The sub-layer must be able to support loads and must be clean, dry and free from grease and rust. Eliminate any old adhesive residues. To this end, clean the surface with the plastic cleaner and apply the primer. The drying time must be observed. Extrude and eliminate the first unmixed adhesive part and then assemble the stirrer. The first 2 cm of adhesive must not be used for gluing. During application, the stirrer tip must stay immersed in the adhesive to prevent bubbles from forming. Follow the instructions for use.

Contents

50 ml

Chemical basis

Two-component polyurethane

Processing time

30 s

Colour

Black

Density

1.288 g/cm³

Min./max. processing temperature

15 to 25 °C

Min./max. temperature resistance

-30 to +100 °C

Shore D hardness

79

Can be sanded after

5 min

Sanding conditions

23°C

Adhesive for plastics REPLAST® Easy Superfast including:
Static mixing tube
2 x
Static mixing tube

STATSTATMIXTUB-ADH-2C

Description: For 2C plastic adhesive
Quantity: 2 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Double cartridge gun for 50&nbsp;ml double cartridges
Double cartridge gun for 50 ml double cartridges

DUALCARTGUN-F.50ML

With 1:1 mixing ratio
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details