HSCO 3 in 1 combination screw tap - MFD HSCo Multi Performance M3-M10 6 pcs
Combi screw tap HSCo, Multi Performance 6 pcs
MATAP-SET-KOMBI-HSCO-MULTI-PERFM-(M3-10)
Art.-no. 0658500001
EAN 4062856142286
Register now and access more than 125,000 products
3 in 1 - Drilling, thread cutting and countersinking/deburring in just one operation
No tool changes required, saving time and money
The first combination screw tap, which is suitable for thicker workpieces in addition to sheet metal machining
Enables double-depth drilling, thread cutting and countersinking/deburring unlike conventional combination screw taps (2xD instead of 1xD)
The first combination screw tap that is not limited to use in materials up to 600 N/mm² strength, but is suitable for almost all materials
Newly developed tool geometry and HSCo cutting material
Significantly longer service life compared with conventional combination screw taps
Newly developed tool geometry and HSCo cutting material
Very fast, precise work
Twist drill with speed geometry
Optimal centring when working on curved surfaces
Twist drill with 135° tip angle and optimised cross thinning
New generation of shafts with a combination of triangular, cylindrical and square shanks
The polygon shaft prevents turning in the drill chuck, ensures optimal power transmission and protects the drill chuck from damage
Available exclusively from Würth
For use in cordless drills as well as on hand-held, stationary and upright drills.
Sufficient lubricant must be added.
For tool/material assignments, see the overview tables.
Datasheets(X)
Number of pieces in assortment/set | 6 PCS |
Material to be processed | Steel, Cast metal, Stainless steel, Titanium, Non-ferrous metal |
Quality | ZEBRA-Premium |
Hole type | Clearance hole |
Cutting material | HSCo |
Surface | Vaporised |
Suitable for machine type | Cordless screwdrivers, Drill, Pedestal drilling machine |
Suitable for tensile strength up to | 1200 N/mm² |
Thread type | Metric thread |
Service life (points system) | 4 of 4 points |
Trueness to gauge (points system) | 4 of 4 points |
Versatility (points system) | 4 of 4 points |
Cutting behaviour (points system) | 4 of 4 points |
Chip formation (points system) | 4 of 4 points |
Material of sub-group | General structural steels, Non-alloyed tempering steels, Alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Cast iron, Ductile iron, Malleable cast iron, White cast iron, Stainless steels, sulphurated, Stainless steels, austenitic, Stainless steels, martensitic, Titanium, Titanium alloys, Spring steels, Aluminium, Aluminium alloys, Aluminium casting alloys (<10% silicon), Aluminium wrought alloys, Plastics, thermoset, Plastics, thermoplastic, Brass, long-chipping, Bronze, long-chipping, Copper, low-alloyed |
MATAP-COMBI-HSCO-MULTI-PERFORMANCE-M3
MATAP-COMBI-HSCO-MULTI-PERFORMANCE-M4
MATAP-COMBI-HSCO-MULTI-PERFORMANCE-M5
MATAP-COMBI-HSCO-MULTI-PERFORMANCE-M8
MATAP-COMBI-HSCO-MULTI-PERFORMANCE-M10
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units