Pneumatic drill DBM 13-RL
Pneumatic drill DBM 13-RL, reversible
DRL-PN-(DBM13-RL)-13MM
Register now and access more than 125,000 products
Light, compact design.
Reduced vibrations. Low-fatigue, pleasant working conditions.
Enhanced durability.
Motor with planetary gears for long life and smooth operation
Conveniently located forward/reverse selector
One-handed reverse switch operation
Good speed control
Touch-sensitive trigger
High-quality keyed chuck
Absolute straightness and alignment
Handle exhaust
Reduces noise and directs air away from operator and workplace
- When used regularly, the machine should be lightly oiled via the pneumatic air supply every day. The use of a mist lubricator is recommended.
- Plug-in nipple not included in the scope of delivery
Datasheets(X)
Suitable for the segments of blacksmiths, carpenters, car/truck repairing and industrial maintenance in a wide variety of materials such as steel, wood and plastic.
Drill chuck holder | 3/8 inch x 24 UNF |
Max. drill chuck span width | 13 mm |
Max. idle speed | 400 rpm |
Power output | 0.5 hp |
Operating pressure | 90 psi |
Air consumption | 113 l/min |
Min. hose inner diameter | 9 mm |
Weight of machine | 1.6 kg |
Length x width x height | 222 x 37 x 193 mm |
Thread type x nominal diameter in inches | NPT 1/4 in |
Last viewed
Structural adhesive MS mirror adhesive
Diamond tile cutting machine WAC 90
REPLAST® Easy Fast plastic adhesive
O-ring, imperial NBR 70
Laser receiver Universal LRU 18
Hose connector
Radiator paint brush LM ECONOMY For solvent-based paints
T-hose connector
A4 stainless steel shroud turnbuckle,
Hydraulic manual crimping pliers B12 for wire cable terminals in cases, without crimping jaws