For detailed information, other images and documents, please select individual articles from the following table.
Diesel particulate filter cleaner
Cleaner for removing carbon and ash deposits from diesel particulate filters
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Loosens and removes carbon deposits in the particulate filter
DPF can be cleaned without needing to remove it
Cuts costs, as a new particulate filter does not need to be fitted (depends on the condition of the particulate filter)
Not flammable
Neutral, ash- and metal-free recipe
Residue-free evaporation
This information is intended to advise you to the best of our knowledge, based on our tests and experience. Test the product before use! For further information, please refer to the technical data sheet.
The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting wilfully. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.
The diesel particulate filter cleaner is used to rectify performance losses or faults that are exacerbated by dirty diesel particulate filters. The full absorption capacity is restored by cleaning the filter.
Remove the temperature or pressure sensor.
Insert the probe into the hole created and spray in the direction of the particulate filter to empty
Regeneration then needs to be initiated manually via the tester or by taking a test drive
Interrogate the fault memory following regeneration and delete any errors if necessary. One can is sufficient for one particulate filter
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!