For detailed information, other images and documents, please select individual articles from the following table.
Structural adhesive MS Ultra
Adhesive on the basis of rapidly curing, elastic MS polymer with excellent adhesive strength and temperature resistance
Register now and access more than 125,000 products
Variants
Register now and access more than 125,000 products
Excellent spectrum of adhesion with very high tensile strength
Excellent long-lasting adhesion on nearly all substrates, such as steel, metal, aluminium, plastic, wood, cork and ceramic.
Quick-drying
Shorter processing time, as the material can be applied more quickly.
Briefly heat-resistant to 200 °C
Used for coatings of powder paint during the burning-in process.
Coating compatibility
Can be painted before skin formation with most commercially available paints (wet on wet).
UV-resistant
Excellent ageing properties
Free of solvents, silicones and isocyanate
Given the variety of different paints and coatings available, compatibility must be tested before use. With alkyd resin paint, drying may take longer.
The instructions for use are recommendations based on the tests that we have carried out and our experiences; you should carry out your own tests on the product prior to each application. Because of the large number of applications as well as storage and processing conditions, we accept no liability for results arising from specific applications. If our free customer service provides technical information or advice, no liability is accepted except when the advice given or the information provided falls within the scope of our specified, contractually agreed service or where the adviser acted intentionally. We guarantee that our products are always of the highest quality. We reserve the right to carry out technical amendments and develop products further.
For structural adhesion in areas where a quick curing time and high tensile strength are required, and which must later be painted. Suitable for application in bodywork and vehicle construction, car manufacture, metal construction and equipment and machinery construction, as well as electrical, plastic, ventilation and air conditioning technology.
The application surface must be clean, dry and free from grease. The processing temperature is between +5 °C and +40 °C. For secure adhesion, use a bead with a minimal adhesive thickness of 3 mm.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!