Quick action anchor W-DS/S With hooks
Quick action anchor for ceilings W-DS/S
ANC-(W-DS/S)-(A2K)-6X75
Art.-no. 0905363001
EAN 4050641979339
Individual price display after login
Exclusively for trade customers
Register now and access more than 125,000 products
Quick and easy to fit by hand. For suspension in concrete, zinc-coated steel, with hook
- Quick and easy to fit
- Easier and quicker to drill
- Does not require specialist tool or setting tool
- Easy to fit: Push the anchor in, pull it towards you – done
- Anchors with friction locks – controlled expansion anchor
Proof of Performance
For fitting non-load-bearing building structures in concrete, European Technical Approval ETA-13/0490
- Dimensioning in accordance with the “European Technical Approval Guidelines (ETAG) for metal anchors in concrete” annex C, dimensioning method C
- The anchor has European Technical Approval for use in both reinforced and non-reinforced concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12.
- Anchorage in pairs or as an anchor group in non-load-bearing building structures with ETA in concrete in cracked (tension zone) and crack-free concrete (compression zone)
Create the drill hole
Clean the drill hole
INSERT W-DS/S.
Fully insert W-DS/S.
Pull down the W-DS/S with a jerky movement.
For fitting non-load-bearing building structures in concrete, European Technical Approval ETA-13/0490
- Dimensioning in accordance with the “European Technical Approval Guidelines (ETAG) for metal anchors in concrete” annex C, dimensioning method C
- The anchor has European Technical Approval for use in both reinforced and non-reinforced concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206-1:2000-12.
- Anchorage in pairs or as an anchor group in non-load-bearing building structures with ETA in concrete in cracked (tension zone) and crack-free concrete (compression zone)
Product information
Datasheets(X)
Application area
- Suitable for fixing: light ceiling plates and ceilings, ceiling structures with wire hooks, wire suspenders, hanging brackets, strip lighting, light rails, lamps, cables, chains, etc.
- The anchor can only be used indoors in dry and heated rooms.
| Performance data | ||
| Anchor diameter [mm] | 6 | |
| Plugs for use in concrete in non-load-bearing building structures. (for all load directions) | Fadm [kN] ≥ C20/25 and ≤ C50/601) | 0,5 |
| Würth system components (see 33.1 W-DN) 1) Part safety factors for resistances that are regulated in the approval, and a part safety factor for actions on γF = 1.4 have been taken into account. See European Technical Approval Guidelines (ETAG), annex C, for information about tension and cross loads, edge and centre distances. | ||
| Characteristic values | ||
| Minimum spacing | smin [mm] | 200 |
| Minimum edge distance | cmin [mm] | 100 |
| Minimum surface thickness | hmin [mm] | 80 |
| Effective anchorage depth | hef [mm] | 33 |
| drill diameter 2 | d0 [mm] | 6 |
| Diameter of cutting edges2) | dcut ≤ [mm] | 6,4 |
| Drill hole depth | h1 ≥ [mm] | 40 |
| Würth system components (see 33.1 W-DN) 2) Hammer drill bits of tungsten carbide must comply with the specification in the information brochure from the Deutsches Institut für Bautechnik (The German Institute for structural engineering – DIBt) and Fachverband Werkzeugindustrie e.V. (The Federation of German Tool Manufacturers (FWI)I) concerning “characteristic values, requirements and tests for drill bits for masonry with tungsten carbide cutting edges that are used to produce drilled holes for anchorage”. Würth’s hammer drill bits meet these specifications. | ||
