Sleeve anchor W-CNM hex nut non-ETA
Sleeve anchor W-CNM steel zinc hex nut non-ETA
ANC-TYPE-(W-CNM)-(A2K)-H240-M12X73MM
Register now and access more than 125,000 products
Wide Applications
- Can be used for medium and heavy load range
- Suitable for fastening: Transfer lines on the ground for which installation flush with the surface is specified; steel structures, metal profiles, brackets, foot plates, cable conduits, piping, mounting rails, etc.
Easy installation
- Minimal force needed when setting the anchor
- Can be loaded immediately – no waiting times
- No setting tools required
- Can be set fl ush with the surface: Attached parts can be removed/mounted again at any time
- Reliable installation due to application of prescribed torque during anchoring
Datasheets(X)
Drill diameter | 18 mm |
Drilling depth | 85 mm |
Surface | Zinc plated |
Type description | W-CNM |
Torque during anchoring (T inst) | 75 Nm |
Last viewed
Holder for storage box
Pipe cable lug with inspection hole
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Adapter for core drill bit
Charger clamp Fully insulated, 750 A
Sealing ring
Sleeve anchor W-CNM hex nut non-ETA
Pan head screw with H cross recess DIN 7985, A4 stainless steel, plain
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Pan head screw with H cross recess DIN 7985, A4 stainless steel, plain