Structural adhesive MS Ultra
Structural adhesive MS ULTRA
STRUCADH-MS-ULTRA-CLEAR-CART-290ML
Register now and access more than 125,000 products
Excellent spectrum of adhesion with very high tensile strength
Excellent long-lasting adhesion on nearly all substrates, such as steel, metal, aluminium, plastic, wood, cork and ceramic.
Quick-drying
Shorter processing time, as the material can be applied more quickly.
Briefly heat-resistant to 200 °C
Used for coatings of powder paint during the burning-in process.
Coating compatibility
Can be painted before skin formation with most commercially available paints (wet on wet).
UV-resistant
Excellent ageing properties
Free of solvents, silicones and isocyanate
Given the variety of different paints and coatings available, compatibility must be tested before use. With alkyd resin paint, drying may take longer.
The instructions for use are recommendations based on the tests that we have carried out and our experiences; you should carry out your own tests on the product prior to each application. Because of the large number of applications as well as storage and processing conditions, we accept no liability for results arising from specific applications. If our free customer service provides technical information or advice, no liability is accepted except when the advice given or the information provided falls within the scope of our specified, contractually agreed service or where the adviser acted intentionally. We guarantee that our products are always of the highest quality. We reserve the right to carry out technical amendments and develop products further.
Datasheets(X)
For structural adhesion in areas where a quick curing time and high tensile strength are required, and which must later be painted. Suitable for application in bodywork and vehicle construction, car manufacture, metal construction and equipment and machinery construction, as well as electrical, plastic, ventilation and air conditioning technology.
The application surface must be clean, dry and free from grease. The processing temperature is between +5 °C and +40 °C. For secure adhesion, use a bead with a minimal adhesive thickness of 3 mm.
Contents | 290 ml |
Container | Cartridge |
Chemical basis | MS polymer |
Colour | Clear |
Density/conditions | 1.07 g/cm³ / at 23°C, 50% relative humidity |
Shore hardness A/conditions | 44 / in accordance with DIN 53505 |
Full curing speed/conditions | 3.5 mm/d / 23°C and 50% relative humidity |
Min./max. processing temperature | 5 to 40 °C |
Min./max. temperature resistance | -40 to 100 °C |
Min. tensile strength | 2.9 N/mm² |
Conditions for tensile strength | in accordance with DIN 53504 |
Min. breaking elongation | 220 % |
Breaking elongation conditions | in accordance with DIN 53504 |
Short-term resistance against | Aromatics, Esters, Ketones |
Shelf life from production/conditions | 12 Month / cool and dry storage area |
Silicone-free | Yes |
Solvent-free | Yes |
Isocyanate-free | Yes |
Ultraviolet resistance | Yes |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
1-component expanding foam
Tyre chalk
Order protector with rip-tape fastening
Sabre saw SBS 1100-E
P80 cutting torch for POWERCUT 70
Order protector with rip-tape fastening
Working mirror with magnetic base, flexible
Order protector with magnetic fastening
Compressed air application gun with telescopic plunger PS5
Thread mandrel