Windscreen cutting line
Windscreen cutting line
CUTLNE-WSCRN-ORNG-L65M
Art.-no. 071458 284
EAN 4056807311715
Register now and access more than 125,000 products
High-tech fibres for very high tensile force
- Extremely tear-resistant cutting thread for use in tight corners and in particularly narrow gaps
Minimal risk of paint and interior damage
- Due to its round cross section, cutting injuries are extremely rare
Reusable and flexible
- Can be used two to four times
- If the thread tears, it can be knotted to continue working
The tensile strength is specified in N in this case; for cutting wires, it is indicated in N/mm². One square cutting wire with 0.6 x 0.6 mm cross section and 2000 N/mm² corresponds to tensile strength of approx. 720 N.
Datasheets(X)
Form | Roll |
Min. tensile force | 1600 N |
Length | 65 m |
Colour | Orange |
Material | PE - Polyethylene |
Cord thickness | 0.8 mm |
Last viewed
Hexagon nut ISO 4032 steel 6/8, zinc-plated blue passivated (A2K)
Straight metric VDE single open-end wrench
AW® E 6.3 bit (1/4 inch) with patented AW output and colour coding
VDE 3/8 inch TX socket wrench, short
Countersunk screw, type SK/A4 — cotter-pin installation DIN 7991 (ISO 10462) A4 stainless steel, with countersunk washer, A4 stainless steel
VARIFIX® profile foot
Brake line nipple, type D
Ratchet combination wrench Multi-profile for five screw head drives
Pin contact Micro Quadlok System (MQS) 0.63 uninsulated
Serrated lock washer, externally serrated, shape A DIN 6798, zinc-plated steel, blue passivated (A2K). Externally serrated